Brass Screw 8-32 x 3/8" Round Head Slotted for Faucet Repair (3 pack)

Here is a lot of three (3) brass round head slotted brass machine screws for faucet repair. It holds the Bibb washer in place. The size is 8-32 and 3/8" long under the head.

brass screws
Brass Screw 8-32 x 3/8" Round Head Slotted for Faucet Repair (3 pack)
$1.15 (2 in stock)

(enlarge)

When repairing water valves in an old house, you may need this size of screw for a faucet washer. Newer valves use smaller washers, and home repair centers often do not carry the large sizes.

Specifics:

  • brand: Aurpak
  • size: 8-32
  • material: Brass
  • Length: 3/8"

When replacing faucet washers, if the existing brass screw is difficult to remove, and the metal begins to chip under the screwdriver, STOP! The metal has become brittle and has a good change of breaking. Instead, remove the stem from the valve, remove the remnants of the old washer, put the stem in a vise, and heat the washer sear with a propane torch. This will expand the seat, and lossen the screw. When it is hot, place a properly sized, sharp, flat blade screwdriver into the slot of the screw and gently, but firmly turn the screw. Being careful in this way may save you the chore of replacing the entire valve.

Condition: New.


Brass Screw 8-32 x 3/8" Round Head Slotted for Faucet Repair Rubber Washer

Zoom Photos: tiny, small, large, supersize, jumbo

The focal photo of the Intarsa Gallery.
Intarsa™ Gallery